FAST Scheduling Available We Work Sundays Serving 98 DFW Cities
(214) 225-8874
Lowes Chimney Sweep

Professional Gas Fireplace Installation in Garland, TX

Serving Firewheel, Duck Creek, Camelot, and every corner of Garland with certified gas fireplace installation — 7 days a week.

★ 5-Star RatedCertified & InsuredOpen 7 Days · Sundays TooServing Garland & 98 DFW Cities
$99 Services Starting At
FAST Scheduling Available · 5-Star Reviews · Serving 98 DFW Cities

Garland's mid-century neighborhoods — Firewheel, Duck Creek, Camelot, and the streets around historic downtown Garland — are full of the kind of masonry fireplaces builders loved putting in during the 1960s, 70s, and 80s. Plenty of those homeowners are ready to trade split logs and ash cleanup for the flip-of-a-switch convenience of gas. Lowes Chimney Sweep installs gas log sets, gas inserts, and full wood-to-gas conversions across Garland, and every job starts with a proper look at your existing flue, gas access, and venting needs before any equipment goes in.

Log Sets vs. Inserts: Which Fits Your Garland Fireplace?

Not every Garland fireplace needs the same solution. A vented or ventless log set can work well in an older masonry firebox that's structurally sound but rarely used for real wood fires anymore. A gas insert, on the other hand, is a sealed, more efficient unit that fits into the existing opening and is often the better call for homes in Duck Creek or Camelot where the original chimney has some age on it and homeowners want better heat output with less energy loss up the flue.

If your chimney hasn't had a look in a while, it's worth pairing this decision with a chimney inspection so we know exactly what we're installing into.

Gas Lines, Venting & Ignition Types

Every gas fireplace installation comes down to three technical questions: where the gas line runs, how the unit vents, and what ignition system you want. Direct-vent units pull combustion air from outside and vent directly through a wall or existing flue, which is often the cleanest option for Garland's older masonry chimneys. B-vent and vent-free setups have their own requirements, and ignition choices range from standing pilot to fully remote electronic start. We handle the gas line installation and venting work together so nothing gets mismatched.

Older Flue Warning: Chimneys built in the 1960s-80s were sized for wood-burning, not gas venting specs — running gas through an unverified flue without proper lining or venting checks can be a real safety issue, so this always gets checked first.

Garland's Homes and Weather: Why Conversions Make Sense Here

Garland sits squarely in the path of Texas hail, high wind, and the freeze-thaw swings that come with a North Texas winter. Those conditions are hard on the aging masonry crowns and mortar joints found on so many chimneys in Firewheel and the neighborhoods surrounding historic downtown Garland. When a crown starts cracking or mortar joints start eroding, moisture gets into the flue system, and that's exactly the kind of chimney a gas conversion depends on being sound and properly sealed before installation. We factor Garland's climate into every gas install, checking crown and flashing condition alongside the gas and venting work so you're not installing a new fireplace into a chimney that still needs crown or mortar repair first.

Ready for Real Fire Without the Firewood?

Garland homeowners from Camelot to Duck Creek trust our certified team for gas fireplace installs done right the first time.

(214) 225-8874

Converting a Wood-Burning Fireplace to Gas

A full wood-to-gas conversion is the most involved version of this service, and it's a popular request from Garland's established mid-century homes where the original wood fireplace has sat unused for years. This typically means running a new gas line to the firebox, installing proper venting or confirming the existing flue can be lined for gas use, and choosing between an insert or vented log set based on how the space is used. Because these older chimneys have often gone decades without a full look, we recommend combining the conversion with a chimney liner installation check or a chimney sweep to clear out old creosote and debris before gas equipment goes in. Homeowners curious about the differences can also read our guide comparing gas log sets and inserts for more detail.

What Gas Fireplace Installation Costs in Garland

Pricing for gas fireplace installation depends on several factors: whether you're installing a log set or a full insert, how far the gas line has to run, whether existing venting can be reused or needs modification, the ignition system you choose, and the current condition of your chimney or flue. A straightforward log set install in a fireplace with existing gas access is a different scope of work than a full insert conversion requiring new line runs and venting changes in an older Firewheel or Camelot home. Services start at $99, and every project gets evaluated on-site or through photos before we quote a firm number — no guessing, no surprise add-ons. Call (214) 225-8874 or request a Free Online Quote and we'll walk you through what your specific Garland home needs.

What Our DFW Customers Say

★★★★★

"Very pleased with the professionalism and promptness of service. The chimney sweep was done quickly and efficiently at significantly less cost than the first quote I got from another company. Happy to recommend Lowes Chimney Sweep to anyone in Plano!"

C
Chad Richardson
Plano, TX · Verified Customer
★★★★★

"Outstanding chimney sweep service from start to finish. They were punctual, courteous, and left our chimney spotless with no mess in our home. I won't use anyone else for chimney services in Dallas TX!"

M
Maria Hernandez
Dallas, TX · Verified Customer

More reviews from homeowners across the metroplex are on our reviews section, or learn more about our team before you book.

Frequently Asked Questions, Gas Fireplace Installation in Garland

Can I convert my old wood-burning fireplace in Garland to gas?

In most cases, yes. Many Garland homes in Firewheel and Duck Creek have wood fireboxes that are structurally fine but need a gas line run and venting checked before conversion. We inspect the existing chimney first since decades-old flues sometimes need a liner before gas equipment is installed.

Do I need a liner if I install a gas insert instead of a log set?

Often yes, especially in older Garland masonry chimneys where the flue was sized and built for wood-burning use. A sealed insert typically performs better with a properly sized liner, and we'll confirm what your specific chimney needs during the install visit.

How does Garland's weather affect a new gas fireplace installation?

Hail, high wind, and the freeze-thaw cycles common in Garland winters are hard on chimney crowns and mortar joints, especially on 1960s-80s masonry homes. We check crown and flashing condition alongside the gas work so you're not installing new equipment into a chimney that's already letting in moisture.

What's the difference between a vented gas log set and a gas insert for my home?

A vented log set is generally simpler and less expensive, giving you the look of a real fire in an existing firebox, while an insert is a sealed, more efficient unit built for regular heating use. Which one makes sense depends on your firebox condition and how often you plan to use the fireplace, something we assess on-site in Garland.

How fast can Lowes Chimney Sweep install a gas fireplace in Garland?

Scheduling depends on the scope, whether it's a log set swap or a full conversion with new gas line and venting work, but we serve Garland seven days a week including Sundays. Call (214) 225-8874 or request a Free Online Quote and we'll get you on the schedule.

Helpful Guides From Our Blog

Straight answers from our DFW chimney pros before you book.

Gas Logs vs Wood vs Insert
Tap to Call Now, (214) 225-8874