From Interlochen to South Arlington, we install gas fireplaces, inserts, and log sets built to handle North Texas storms — not just Texas heat.
Arlington homes run the gamut from mid-century ranch houses near East Arlington to newer builds around Viridian, and that range shows up the moment a homeowner asks about swapping a wood-burning fireplace for gas. Whether you're in an older masonry home near the Dalworthington Gardens area or a 2000s-era house in South Arlington with a factory-built chimney, gas fireplace installation isn't a one-size job — it depends on your existing chimney type, your venting path, and how your home was built. We handle the gas line work, venting, and ignition setup so the finished fireplace is safe, code-correct, and actually performs the way it should through a North Texas winter.
Not every gas fireplace project is the same project. Vented or vent-free log sets are typically the simpler route for an existing wood-burning masonry fireplace that just needs a gas upgrade, while a gas insert is a sealed, more efficient unit that slides into the existing firebox and connects to the chimney's flue with its own liner. Homes in older Arlington neighborhoods with original masonry fireplaces often lean toward inserts for better heat output and efficiency, while newer factory-built units may already be gas-ready or need only a log set and venting adjustment.
If you're not sure which fits your fireplace, our chimney inspection service is usually the starting point — it tells us what we're actually working with before any gas line or venting decision gets made.
Every gas fireplace installation involves three core decisions: how gas gets to the unit, how exhaust gets out, and how the fireplace ignites. Gas line runs need to be sized and routed correctly, venting has to match the appliance (natural vent, direct vent, or a converted flue), and ignition can range from a standing pilot to an electronic ignition system. Homes with older prefab chimneys — common throughout Arlington's 1970s-through-1990s housing stock — often need venting evaluated or upgraded before a new gas appliance goes in, which is why we frequently pair installation with chimney liner work when the existing flue isn't a match for the new unit.
Arlington sits in one of the hardest-hit hail corridors in the country, and that matters more for gas fireplace installation than most homeowners expect. Chimney caps, crowns, and exterior venting terminations take a beating during spring hailstorms and high-wind events, and a damaged cap or cracked crown can let moisture into a system that now also has gas line penetrations and a sealed venting path. Add in the clay-soil shifting common across South Arlington and East Arlington, which can move foundations enough to stress an older masonry chimney, and it's clear why we inspect the full chimney structure — not just the firebox — before installing new gas equipment. A fireplace conversion is only as good as the chimney it's built into, and in Arlington that chimney has usually already weathered a few serious storms. If your cap or crown looks rough, it's worth pairing installation with a chimney cap replacement so the new gas system isn't venting through a compromised structure.
We install gas fireplaces, inserts, and log sets across Arlington — from Viridian to South Arlington — with venting done right the first time.
(214) 225-8874Gas fireplace installation combines two things you don't want handled loosely: a live gas line and a venting system tied into your home's chimney. Improper venting can push combustion byproducts back into the house, and an incorrectly sized gas line can create pressure or ignition problems down the road. Our technicians are certified and insured, and every installation includes checking that the venting, clearances, and gas connection are all correct for your specific fireplace or insert — not just installed and left. For homes converting fully away from wood burning, we also coordinate wood-to-gas conversion work so the old flue is properly sealed or lined for its new purpose.
Pricing for gas fireplace installation depends on several real factors: whether you're installing a log set or a full insert, whether your existing chimney needs a new liner or vent path, how much gas line work is required to reach the fireplace location, and the ignition system you choose. Older masonry chimneys in Arlington's established neighborhoods sometimes need more venting prep than newer factory-built systems, which can shift the scope of the job. Rather than quote a number that doesn't reflect your actual chimney, we start with a Free Online Quote based on your home, your fireplace type, and what your venting currently looks like — with all services starting at $99 depending on scope. For homeowners weighing gas against a full remodel, our post on choosing between gas and wood fireplaces is a useful next read, and our seasonal chimney maintenance guide covers what to watch for once your new system is in.
"Very pleased with the professionalism and promptness of service. The chimney sweep was done quickly and efficiently at significantly less cost than the first quote I got from another company. Happy to recommend Lowes Chimney Sweep to anyone in Plano!"
"Outstanding chimney sweep service from start to finish. They were punctual, courteous, and left our chimney spotless with no mess in our home. I won't use anyone else for chimney services in Dallas TX!"
More reviews from homeowners across the metroplex are on our reviews section, or learn more about our team before you book.
In most cases, yes — many East Arlington and Interlochen homes with original 1970s–1990s masonry fireplaces are good candidates for conversion. The key is checking the flue and venting first, since older chimneys sometimes need a liner update before gas equipment goes in. We evaluate that as part of the installation quote.
It depends on your goals and your existing firebox. A log set gives you a realistic flame in an existing masonry fireplace, while an insert is a sealed unit that typically delivers more heat and efficiency. Homes across South Arlington with older masonry fireplaces often choose inserts for better performance during our colder snaps.
Yes — chimney caps and vent terminations take real damage during Arlington's hailstorms and high-wind events, and a compromised cap can let moisture into a system that now includes gas venting. We check the exterior venting and cap condition as part of every gas fireplace installation.
Most installations are completed in a single day, though scope varies — a straightforward log set installation moves faster than a full insert install requiring new gas line routing or a liner update. We'll walk through the specifics for your home during the quote.
Yes, we install gas fireplaces throughout Arlington and the surrounding DFW area, including Viridian, Dalworthington Gardens, and neighborhoods on both the east and south sides of the city, seven days a week including Sundays.
Straight answers from our DFW chimney pros before you book.
